NAVA Tools
Flashing Firmware

Enable MIDI and then pick the MIDI out port the Nava listens on and the MIDI in port it answers on.

Hold steps 1, 3 and 5 while powering on the NAVA, select firmware and press Flash.

The device will reboot into the main operating system if no firmware has begun transferring after 30 seconds.

MIDI OUTPUT to NAVA
    MIDI INPUT from NAVA
      Firmware Image Select
      Progress 
      
    
      

    
    
      
      SysEx transfers
      
      
        The unit must be stopped and on the SysEx config page:
        SHIFT + TEMPO to type / select.
      
      
    
      

    
    
      
      
      
        DUMP patterns from NAVA
        
        
      
        
        
        
        
      
          
          
          
        
      
      
      

      
      
        RESTORE patterns to NAVA
        
        
      
        
        
        
        
      
          
          
          
        
      
      
      
    
      
  
      


  


  
      


      

      





  
      
    
      !